CUBEX MEGAMATIC 5200 SELF-PROPELLED UNDERGROUND ITH LONG HOLE DRILL
- Street: 44 Oak Road
- City: Blind River
- State/Province: Ontario
- Country: Canada
- Zip/Postal Code: P0R 1B0
- Listed: May 12, 2019 6:43 am
- Expires: This ad has expired
Description
1 ONLY “REBUILT AND UPGRADED” CUBEX MEGAMATIC 5200 TRACK MOUNTED SELF-PROPELLED UNDERGROUND ITH LONG HOLE DRILL
Description: The 5200 is a track mounted In-The-Hole drill designed to drill with ITH hammer powered by high air pressure. The drill is unitized with an on-board reciprocating boost air compressor.
Performance: This Upgraded 5200 is self-propelled with an on board Deutz Diesel Air Cooled BF4L-913 Diesel Engine and Heavy Duty Drill Mast and can be used to drill from 3.5 inch (89 mm) to 8.5 inch (216 mm) diameter standard holes
to a depth greater than 330 ft (100 m). It can also be used for reaming up to 17.5 inch (445 mm) diameter holes with a 12 inch hammer and has been fitted with a heavy Duty Drill Mast and is capable of drilling in the face and raise bore holes up to 30” in diameter.
Unit is Equipped with New Upgrades as Follows.
Traverse has been modified to tilt allowing drilling any direction and angle while having the rod easily accessible for adding and removing.
On board Deutz Diesel Air Cooled BF4L-913 Diesel Engine for Tramming
Heavy Duty 10’ Drill Mast for deep hole drilling
Traverse has been modified to tilt allowing drilling any direction and angle while having the rod easily accessible for adding and removing.
Year of Manufacture: 1999
Year Rebuilt: 2018
Hours Since Rebuild: 2739
| Main Specifications | ||||||||||
| Carrier | 5200 Standard | |||||||||
| Top Drive | 6230 | |||||||||
| Maximum Working Pressure
Maximum Torque Rotation Speed Patented Splined Piston Breakout System Mast |
3000 PSI
4225 Ft Lbs. 0-80 RPM
10’ Mast, Fixed Centralizer |
|||||||||
| Positioning System | Single Slide-over | |||||||||
| Control System | Electric/Hydraulic Controls | |||||||||
| Powerpack | 92 kW | 125 HP | ||||||||
| Hammer Lubrication | AS-5200 | |||||||||
| Air Booster | 99AX-Reciprocating | |||||||||
| Water Injection System | 27 lpm (48 bar) | 7 gal/min (700 psi) | ||||||||
| Ground Clearance | 180 mm | 7.1” | ||||||||
| Tramming Length | 5 464 mm | 215.1” | ||||||||
| Tramming Width | 1 803 mm | 71” | ||||||||
| Tramming Height | 2 510 mm | 98.8” | ||||||||
| Weight | 10 400 kg | 23 000 lb | ||||||||
| Tramming Speed, Electric
Horizontal Only |
2 kph | 1.2 mph | ||||||||
| Gradeability | 35% | |||||||||
| Carrier | ||||||||||
| Tracks – Sealed and lubricated with Caterpillar© take up system | ||||||||||
| Type | Triple Grouser, Sealed and Lubricated | |||||||||
| Width | 305 mm | 12” | ||||||||
| Brakes | SAHR | |||||||||
| Ground Clearance | 180 mm | 7.1” | ||||||||
| Centralized Grease Lubrication | ||||||||||
| Mast | ||||||||||
| Mast | 10’ with Fixed Centralizer | |||||||||
| Feed Force | 70 kN | 15 800 lbs | ||||||||
| Max Opening | 222 mm | 8.75“ | ||||||||
| Positioning System | ||||||||||
| Single Slideover | 724 mm | 28.5” | ||||||||
| Feed Extension (1.8 m [6’] Rod) | 1 371 mm | 54” | ||||||||
| Swing Angle | 360° | |||||||||
| Stinger Extension
Top Bottom |
1 830 mm
610 mm |
6’
2’ |
||||||||
| Control System | ||||||||||
| Control System | Electric/Hydraulic Controls, Buggy Mounted
Anti-Jamming, Smooth Collaring 7.6 m (15’) Cable |
|||||||||
| Powerpack | ||||||||||
| Electric Motor | 1 x 75 HP | |||||||||
| Pump Type | 1 x 100 cc Variable Displacement Axial Piston Pump | 6.1 cu.in./rec | ||||||||
| Filtration
Pressure Return |
1 x 5 micron
1 x 10 micron |
|||||||||
| Oil Tank Volume | 265 L | 70 US Gal | ||||||||
| Tank Filling | Electric Fill Pump | |||||||||
| Oil Cooling | Shell and Tube Cooler | |||||||||
| Hammer Lubrication System | ||||||||||
| Grease/Oil Injection | ||||||||||
| Metering Capacity | 4 L/hr | 1 US Gal/hr | ||||||||
| Tank Size | 20 L | 5.3 US Gal | ||||||||
| Air Booster
Electric Motor 1 x 60 HP |
||||||||||
| Booster Type | 99AX – Reciprocating | |||||||||
| Max Working Pressure | 24.1 bar | 350 psi | ||||||||
| FAD, Max Working | 20 m3/min | 700 scfm | ||||||||
| Min Inlet Pressure | 6 bar | 90 psi | ||||||||
| Water Injection System | ||||||||||
| Water Pump Type | Triplex Piston Pump | |||||||||
| Capacity | 27 Lpm (48 bar) | 7 Gal/min (700 psi) | ||||||||
| Inlet Pressure | 2 – 7 bar (drilling) | 30 – 100 psi (drilling) | ||||||||
| Electrical System | ||||||||||
| Total Input Power | 135 HP | |||||||||
| Standard Voltages | 480 VAC (Can be Reconfigured for other Voltages and Duty – Cost is Extra) | |||||||||
| Frequency | 60 Hz | |||||||||
| Lights
Working Driving Lights |
2 x 55W HID
2 x 65W |
|||||||||
| Starter | Delta-Wye | |||||||||
| Safety Shutdowns | Low Mine Air Pressure
Low Mine Water Pressure Low Compressor Oil Pressure High Discharge Air Temperature Low Hydraulic Oil Level |
|||||||||
| Safety Feature | Tram Active Strobe | |||||||||
– Dimensions (Approx.): 215” Long x 71” Wide x 98” High (Tramming Position)
– Weight (Approx.): 23,000 Lbs.
Inspections and Purchase Terms: Please contact us for details and pricing.
This Unit has been completely Rebuilt with Upgrades Adding to its Overall Performance and Functionality and is Ready to Work.
2204 total views, 1 today